This page contains affiliate links. If you buy through them, we may earn a commission at no extra cost to you.
Coastal Picks
Universal CPAP Hose review (6-Foot)
A USA-made replacement hose with standard connectors, built to fit most major CPAP and BiPAP machines.
Quick take
This is a 19mm-diameter, 6-foot (72-inch) CPAP hose with standard 22mm rubber-end connectors on both ends, made to be compatible with Respironics, ResMed, DeVilbiss, Fisher & Paykel, and most other major CPAP/BiPAP machines. It's made in the USA with a smooth-bore interior meant to resist buildup.
From our own use
As a CPAP user, I know the hose is one of the harder components to keep clean. Although I run water and mild soap through it, replacing it periodically makes sense because a new hose is relatively inexpensive. I use the six-foot version because the extra length gives me flexibility if the machine needs to sit farther from the bed.
| Diameter | 19mm |
| Connector size | 22mm, both ends |
| Length | 6 ft (72 in) |
| Made in | USA |
| Compatibility | Respironics, ResMed, DeVilbiss, Fisher & Paykel, and most standard CPAP/BiPAP machines |
Who it's for
Good fit
- CPAP users due for a routine hose replacement
- Anyone whose machine needs to sit farther from the bed and wants extra length
- People who want a USA-made hose with standard connectors
Skip it if
- Your machine uses a proprietary heated-hose connector
- You need a specific non-standard diameter
Care and replacement schedule
Even with regular water-and-mild-soap cleaning, hoses degrade over time — replacing on a schedule rather than waiting for visible wear is the more common approach among long-term CPAP users, since the cost of a new hose is low relative to the hassle of a cracked or moldy one.
Pros and cons
Pros
- Standard 22mm connectors fit most major CPAP/BiPAP brands
- Made in the USA
- Smooth-bore design resists interior buildup
- Inexpensive enough to replace on a routine schedule
Cons
- Won't fit proprietary heated-hose systems
- 6-foot length may be more than needed for some bedroom setups
Frequently asked questions
Will this fit my CPAP machine?
It's built with standard 22mm connectors compatible with Respironics, ResMed, DeVilbiss, Fisher & Paykel, and most other major machines — check your machine's connector type if you're unsure.
How often should a CPAP hose be replaced?
There's no single universal number; many users replace every few months as part of routine maintenance, alongside regular cleaning.
Is it heated?
No, this is a standard unheated hose, not a climate-control heated tube.
How long is it?
Six feet (72 inches), longer than many stock hoses that ship with CPAP machines.